FPS-SOFTAIR

..

Xring Carbon fiber reinforced technopolymer piston head designed for high rof and to increase the silence of the aeg (XPAVPCF)It is the lightest among those produced by the FPS for rifles with gusts over 30 BBs / second.Its adoption lightens the weight of the piston and piston head with a significan..

- Very low coefficient of friction between metal and rubber- Adhesion to treated surfaces to ensure lasting protection over time- Chemical inertia with almost all commercial elastomers (not with EPDM)- High resistance to drip- Very fast response to sudden mechanical stress..

- Excellent lubrication at high rotation speeds- Resistance to large workloads- Corrosion protection of treated surfaces- Excellent resistance to water- Very fast response time to sudden mechanical stress..

6 useful springs that are more likely to get damaged, worn or lostFeatures:- Reinforced spring sets for most OEM brands- Precision recalculated tension for each spring to better serve its purpose- Enhanced durability..

6 useful springs that are more likely to get damaged, worn or lostFeatures:- Reinforced spring sets for most OEM brands- Precision recalculated tension for each spring to better serve its purpose- Enhanced durability..

The 95 m/s FPS spring is calibrated in collaboration with Daniele Cimadoro of Terni Softair.In the phase immediately following forming, the spring is stabilized in the oven at a temperature of 400 degrees centigrade for thirty minutes in order to optimize its duration over time.100% MADE IN ITALY100..

WELL MB03 90 m/s FPS spring has been calibrated on original sniper rifle.Of course with shorter or longer barrel the performance will decrease or increase, therefore the calibration will be harder or softer.In the calibration process has not been taken in consideration the thickness due to the beari..

WELL MB03 100 m/s FPS spring has been calibrated on original sniper rifle.Of course with shorter or longer barrel the performance will decrease or increase, therefore the calibration will be harder or softer.In the calibration process has not been taken in consideration the thickness due to the bear..

The 100 m/s FPS spring is calibrated in collaboration with Daniele Cimadoro of Terni Softair.In the phase immediately following forming, the spring is stabilized in the oven at a temperature of 400 degrees centigrade for thirty minutes in order to optimize its duration over time.100% MADE IN ITALY10..

100 m/s FPS spring has been calibrated on 363 mm inner barrel and gearbox with type D cylinder (for barrels from 301 to 400 mm).Of course with shorter or longer barrel the performance will decrease or increase, therefore the calibration will be harder or softer.In the calibration process has not bee..

100 m/s FPS spring has been calibrated on 363 mm inner barrel and gearbox with type D cylinder (for barrels from 301 to 400 mm).Of course with shorter or longer barrel the performance will decrease or increase, therefore the calibration will be harder or softer.In the calibration process has not bee..