- Stock: In Stock
- Model: EA0148B
Specifications
Nominal Voltage: 7.4 V (2S – two cells in series)
Capacity: 1300 mAh
Continuous Discharge Rate: 20 C
Mini-Type Stick – compact, designed for replicas with limited space (e.g., buffer tube)
Connector: Mini-Tamiya (standard for this type of battery)
Estimated Dimensions:
Length: 4.75 in (~121 mm)
Width: 0.75 in (~19 mm)
Thickness: 0.5 in (~12 mm)
Estimated Weight: 67 g
Associated Hazards and Risks
Deep discharge (< ~3.0 V/cell) – may lead to irreversible damage and inability to charge.
Overcharge (> 4.2 V/cell) – risk of swelling, fire or explosion.
Excessive discharge current (above 20 C) – risk of overheating and damage.
Mechanical punctures or shocks – can trigger violent chemical reactions and fire.
Extreme temperatures – above 60 °C generates risk of explosion; below 0 °C decreases performance and increases risk of internal damage.
Unattended charging – there is a risk of fire; it is recommended to charge under supervision and in a fireproof bag (Li-Po bag).
Improper storage – if left connected to the replica or completely discharged, damage increases; ideal: store at ~3.8 V/cell, in a cool and safe place.
Safety recommendations
Use dedicated Li-Po chargers with balancing.
Disconnect the battery from the replica immediately after use.
Store at ~3.8 V/cell, in a fireproof bag, in a cool place, away from fire.
Check regularly: do not use damaged, deformed or swollen batteries – they can pose a major hazard.
| Technical | |
| Amperage | 1300 |
| Voltage | 7.4 |
